Mechanixer
All case studies
Case study · Plant engineering

A 40+ m silo tower, scanned into one Inventor part

A plant-engineering firm needed the complete as-built geometry of a silo tower to design new steel against it. The laser scan was far too heavy to design in, and modelling the tower by hand would have taken weeks.

Industry
Bulk materials
Region
Germany
Service
Plant engineering
Illustrations.
silo tower, scanned top to bottom
40+ m
silo tower, scanned top to bottom
of scan points processed
Billions
of scan points processed
detail kept from the scan
1 mm
detail kept from the scan
in Inventor, no linked files
1 part
in Inventor, no linked files
The challenge

What had to be solved

  • The scan covered the whole tower from dozens of scanner positions: tens of gigabytes of points.
  • Designers need geometry they can measure, section and dimension, not a cloud they can only look at.
  • The result had to live in the client's Inventor and Vault like any other part.
The result

What the client has now

  • The complete tower opens in Inventor as one part, with height levels that switch on and off.
  • Drawings dimension the scan geometry directly, without a conversion step.
  • New platforms, stairs and supports are designed against the real plant, so clashes show up at the desk, not on site.
What we did

How we approached it

  1. 01

    Read the raw scan

    We read the registered scan position by position and cut it into 4 m tiles, so even the densest areas fit in memory.

  2. 02

    Surfaces at 1 mm

    Each tile becomes a surface from 2 mm points, simplified only as far as it stays within 1 mm of the full detail. Areas the scanner did not see stay open.

  3. 03

    Checked against the scan

    We compared the surfaces with the scan points themselves, not with another model, so nothing was invented.

  4. 04

    Automated into Inventor

    iLogic rules imported hundreds of tiles, grouped them by height level and saved one part with the scan geometry inside: one file, one part number for Vault.

Images

The work, step by step

The scan: points from every scanner position
Surfaces built tile by tile, kept to 1 mm
In Inventor by height level, with new steel designed against it

Illustrations. Click an image to enlarge it.

Deliverables

What was handed over

  • One Inventor part with the scan geometry, split by height level
  • Optional assembly per level for lighter work
  • Check of the surfaces against the scan points
  • Ready for check-in to Vault
Tools
  • Autodesk Inventor
  • iLogic
  • Autodesk Vault
  • Own processing in Python
  • E57 laser scan
Mechanixer turns our point clouds into accurate as-built models and designs the platforms, steel structures and conveyors that fit the real plant. The drawings are clean and the parts fit on site. A reliable partner for our plant projects.
DEGerman plant-engineering company · client

This project is part of our plant engineering work.

Talk to the engineer, not a sales rep

Send us one area of your plant.

Tell us what has to change and what scan data you have. In 20 minutes you will know what the model and the design would take.

Blagoj Bejkov
Blagoj Bejkov
Founder and lead engineer
Replies within one business day
Book a 20-minute call