Mechanixer
All case studies
Case study · Configurators and automation

Four sheet sizes nested and compared, with a report that rebuilds in one command

An equipment manufacturer wanted to know which standard sheet size wastes the least material for each plate in a welded steel unit. We checked the assembly with an iLogic rule, nested every material and thickness on four sheet sizes, and built a report that reads the results straight from the nest file.

Industry
Industrial equipment
Region
Northern Europe
Service
Configurators and automation
Illustrations.
sheet sizes compared for every plate
4
sheet sizes compared for every plate
nests from one setup
24
nests from one setup
parts checked by an iLogic rule first
85
parts checked by an iLogic rule first
rebuilds the 14-page report
1 command
rebuilds the 14-page report
The challenge

What had to be solved

  • Standard sheets come in several sizes, and the best one changes with the material and the thickness.
  • The assembly mixed laser-cut plate and rubber gaskets with machined and bought parts that do not belong in a nest.
  • Comparing 24 nests by exporting a report for each one takes hours and invites mistakes.
The result

What the client has now

  • Every plate compared on four sheet sizes, side by side, instead of 24 separate reports.
  • Only parts that are really cut from plate or rubber go into the nest.
  • When prices or quantities change, the whole report rebuilds in one command.
  • Ready for the batch run once the final quantities and prices are confirmed.
What we did

How we approached it

  1. 01

    Check before nesting

    An iLogic rule scans every part and marks it ok, check, fix or exclude. Machined and bought parts stay out, missing flat patterns are created.

  2. 02

    One setup, 24 nests

    Every material and thickness on four sheet sizes, with the client's edge margin and part spacing per thickness, rotation and flipping allowed.

  3. 03

    Tuned, not accepted

    When one thickness needed an extra sheet on the smallest size, we changed the placement order until it fitted: 6 sheets instead of 7.

  4. 04

    Report in one command

    Python reads the results straight from the nest file and builds the report with every layout, efficiency and material use per sheet size.

Images

The work, step by step

From the assembly to the sheet: plate parts nested
Four sheet sizes, compared for every material
One of the 24 layouts, as it appears in the report

Illustrations. Click an image to enlarge it.

Deliverables

What was handed over

  • Nest file with four sheet-size studies
  • 24 sheet layouts as DXF and images
  • Status report with comparison and all layouts
  • iLogic pre-check rule
  • Report script and result tables
Tools
  • Autodesk Inventor
  • Inventor Nesting
  • iLogic
  • Python

This project is part of our configurators and automation work.

Talk to the engineer, not a sales rep

Show us one product family.

In 20 minutes you will know whether a configurator pays off for it and what it would take.

Blagoj Bejkov
Blagoj Bejkov
Founder and lead engineer
Replies within one business day
Book a 20-minute call